Advantages of Outdoor LED screens

The following are the advantages of outdoor LEDs.

High-definition capabilities

Integrated management systems

The best LEDs connect with different display networks and have integrated management systems making it easy to schedule the video one intends to broadcast.

Remote controls

With the remote control, you have full autonomy over the message relayed on your LED screen no matter where you install them.

Outdoor application of LEDs

LEDs can be applied to the following situations:

Building walls

The outer walls of buildings close to continuous traffic are the most common places to install LED screens. If the traffic is continuous and since the buildings are stationary potential customers are going to be able to see your message.

Malls

These days LED screens are trademarks of shopping malls. The shopping malls already concentrate huge numbers of people. LED screens are effective to gain people’s attention. They can notify a potential customer about a flash sale, promote a new offer to passersby, etc.

Concerts, and sporting events

The giant LED engages the audience in a concert or sporting event. A lot of people do not like to go to stadiums during sporting events because they do not have the privilege of replays. Now, with LEDs, you have that privilege. The same goes for concerts. People have the privilege to monitor all of the activities happening on the stage

Technical Consideration

Here are some of the things to consider before getting an Outdoor LED screen for architecture.

Visuals

Your LED screen must attract the attention of passersby and communicate your messages. As we said earlier: the clarity of your image determines people’s reactions. The LED screens must be bright and accurately display colors.

Visuals

Your LED screen must attract the attention of passersby and communicate your messages. As we said earlier: the clarity of your image determines people’s reactions. The LED screens must be bright and accurately display colors.

Brightness

For images to be truly visible they must be bright no matter the time of day. When your image is bright, you can stimulate the interest of passersby. The brightness of video walls is measured with nits. A high nit rating means a bright video wall. For outdoor fixed LED, you need at least 5,000 nits so that your image can be fully seen

Durability

LEDs are supposed to be strong. Many LEDs like the ones that we have at USER are water, fire, and impact resistant.

But there are some things that you need to add to them to make them stronger. For example, you need to install a lightning arrester to prevent lightning attacks. These make sure that the main body and the display shell are grounded. It also has a grounding resistance of less than 3ohms which discharges excess current when exposed to lightning.

Temperature

Since your LED screens are going to be outside, they are going to be exposed to all weather conditions. Furthermore, the LEDs themselves exude heat when used. To prevent the integrated circuit from burning, you need to make sure that you have an integrated cooling system.

A recommendation especially for LEDs without a cooling system is to install an axial behind the screen to regulate the temperature between –10 degrees and 40 degrees Celsius. If your screens are installed in hot places, then you might need to install an HVAC system to regulate the internal temperature.

Constructing it properly

You must properly consult with the right people to get the best out of your LED screens. You can install outdoor LED screens on walls, on vertical poles, moving trucks, etc. The good thing about LEDs is that you have full autonomy to customize them,

Maintenance

You have to consider Maintenance when picking a LED screen. Our FH series comes with a hydraulic rod making it easy to open the doors for quick maintenance. While the FH series can be easily maintained, it is also imperative, that you find the proper way to install it for easy access subsequently

The location

The location of your LED screen is important. To get the most out of your LED, you must put them where there is high traffic. For example:

• Road junctions
• Highway
• Shopping malls etc.

Survey

Before installing your LED screen, you need to make an in-depth survey. You need to analyze the environment, the terrain, the range to emit light, the Luminosity of the place, and a few other parameters. To make sure the installation is smooth, the person taking the survey must ensure that all the equipment is appropriately used and plan the different methods to install the LED.

Construction

You can install LEDs in two major ways: you can suspend them on the side of the wall, or balance them on a roof or surface. Furthermore, communication is important for the equipment personnel to make sure that everyone and everything is safe.

Debugging the light emitting range

Light emitting ranges differ based on the LED display visual angles. When installing LEDs outdoors make sure that they are installed based on the field acceptance ability. Analyze the angle people can see from. Also check the normal, luminance-balanced images and the captions. When you match the luminance with the right angle then you can get the most out of your LED.

Inspection and maintenance

For follow-up inspection, you need to check the waterproof layer, the rain shelter, the cooling systems, etc. When you inspect these parts, then you are guaranteed a fine display of your LED. It Is important that when you are installing the LED, you install them in a fashion where subsequent maintenance is easy.

Conclusion

Now that we have taken you through some of the things that you need to know about outdoor fixed LED displays, you can now go through our pick of high-end outdoor fixed LED displays